Constitutive modelling and numerical simulation of multivariant phase transformation in superelastic shape‐memory alloys

This work concerns the micromechanical constitutive modelling, algorithmic implementation and numerical simulation of polycrystalline superelastic alloys under multiaxial loading. The model is formulated in finite deformations and incorporates the effect of texture. The numerical implementation is based on the constrained minimization of the Helmholtz free energy with dissipation. Simulations are conducted for thin tubes of Nitinol under tension–torsion, as well as for a simplified model of a biomedical stent. Copyright © 2004 John Wiley & Sons, Ltd.     

A three‐dimensional model describing stress‐temperature induced solid phase transformations: solution algorithm and boundary value problems

An always increasing knowledge on material properties as well as a progressively more sophisticated production technology make shape memory alloys (SMA) extremely interesting for the industrial world. At the same time, SMA devices are typically characterized by complex multi‐axial stress states as well as non‐homogeneous and non‐isothermal conditions both in space and time. This aspect suggests the finite element method as a useful tool to help and improve application design and realization. With this aim, we focus on a three‐dimensional macroscopic thermo‐mechanical model able to reproduce the most significant SMA features (Int. J. Numer. Methods Eng. 2002; 55 : 1255–1264), proposing a simple modification of such a model. However, the suggested modification allows the development of a time‐discrete solution algorithm, which is more effective and robust than the one previously discussed in the literature. We verify the computational tool ability to simulate realistic mechanical boundary value problems with prescribed temperature dependence, studying three SMA applications: a spring actuator, a self‐expanding stent, a coupling device for vacuum tightness. The effectiveness of the model to solve thermo‐mechanical coupled problems will be discussed in a forthcoming work. Copyright © 2004 John Wiley & Sons, Ltd.     

Al-Zn-Ce非晶合金的相选择与组织结构演化

本文研究了具有典型分解特征的Al-Zn-Ce非晶合金的形成和晶化过程，探讨了各种相的生成顺序。XRD和DSC测试结果表明强烈的化合物短程序有利于Al-Zn-Ce非晶合金的形成。在Al-Zn-Ce非晶合金的晶化过程中存在复杂的相选择行为，多种相的竞争形核和有限生长使其具有复杂的结构特点。同时，结果也表明冷速对该体系非晶的形成有很大影响。     

钻井液固相化学清洁剂ZSC-201的合成及性能

介绍了钻井液用固相化学清洁剂ZSC－201的室内合成及性能评价，结果表明，固相化学清洁剂ZSC－201具有较强的抑制性，可有效抑制粘土水化分散，保证钻井液清洁，在钻井液体系中与阴、阳离子型钻井液处理剂配伍性好，同时具有较好的抑制增效作用，在有效的加量内对钻井液滤矢量和流变性等影响小，固相化学清洁剂ZSC－201已在中原油田近30口井中应用，具有良好的推广应用前景。     

W-35%Cu液相活化烧结工艺研究

本文从钨铜两相迁移机制和固溶扩散的角度 ,实验研究了钨铜复合粉的活化和常规烧结 ,分析了钨铜复合粉液相活化烧结过程中球磨时间、烧结温度、保温时间和升温速度对材料致密度的影响。结果表明 ,短时间球磨的钨铜复合粉具有良好的烧结性能 ,烧结温度和保温时间对材料致密度影响很大 ,活化烧结能有效降低烧结温度 ,提高烧结致密度     

β″－Al_2O_3陶瓷的强化和韧化

研究了稳定ＺｒＯ＿２和部份稳定ＺｒＯ＿２对β″－Ａｌ＿２Ｏ＿３陶瓷的强化和韧化作用，观察了不同种类、不同含量的ＺｒＯ＿２对β″－Ａｌ＿２Ｏ＿３陶瓷的显微结构、力学性能和电导率的影响，探讨了β″－Ａｌ＿２Ｏ＿３的韧化机理。     

Importance of out-of-plane dispersion of the excitation spectrum of superconducting bilayers with Josephson coupling

We study the effect of Josephson coupling between adjacent superconducting layers on the BCS energy spectrum. We find that the interference between the gap functions of two layers can lead to vanishing condensation energy for perpendicular momenta corresponding to the formation of standing waves. We therefore predict a conventional energy spectrum for large interlayer spacings, if the gap of the single layers has no nodes, and in all cases a gapless spectrum for small spacings. Within the experimental error, our numerical results account for the low-temperature dependence of the penetration depth reported in Nd_1.85Ce_0.15CuO₄ and YBa₂Cu₃O_6.9.     

HCMOS器件γ辐射损伤电路分析

本文对最基本的HCMOS器件(反相器和与非门)作了γ辐射损伤实验。通过器件性能变化,分析了γ辐射对电路的作用。     

铸铁热分析用试样新型激冷剂的实验研究

从冷却曲线上相变段倾角最小原则出发，研究了新型激冷剂的配比与热分析法检测铸铁成分精度的关系，实验结果表明，能使相变段倾角最小的成分配比，也能提高对铸铁成分的热分析和检测精度。     

美国UCC公司项目实施八段法

国外工程公司的项目实施工作法是科技发展和经济发展的产物。公司为谋求生存和发展,必须采取先进的技术和科学管理,同时获得适当的利润回报。本文介绍美国UCC公司的项目工作八段法。